Cash On Delivery Available

Cleaning Your Gadgets After Holi: Important Do’s and Don’ts to Follow

Cleaning Your Gadgets After Holi: Important Do’s and Don’ts to Follow

Holi, the festival of colours, brings happiness, laughter and a splash of bright colours. However, it also leaves behind a mess, which often ends up on your gadgets. From fine powder getting deposited in the charging ports to water splashing on the touchscreen, your electronic devices can take the biggest beating of this festival. Proper cleaning is a must to avoid long-term damage and keep them working smoothly.

While it may seem tempting to wipe everything with a wet cloth, cleaning the wrong way can do more harm than good. Using the wrong material or technique can cause the colour to seep deep into the crevices, damage delicate components or even void the warranty. To help you restore your gadgets safely, here is a complete guide on the do's and don'ts of gadget cleaning after Holi.

What to Do: The Right Way to Clean Your Gadgets

Use a microfiber cloth for gentle cleaning
To safely remove color stains and dust from your gadgets, use a dry microfiber cloth. Unlike tissue or cotton, microfiber effectively captures small particles without scratching the surface. For stubborn stains, lightly dampen the cloth with distilled water and gently wipe the affected areas.

Here's the Step by Step Recap:

Use a soft brush to remove dried color powder

If the color powder has settled in the charging port, speaker grille, or seams, a soft-bristled brush - such as a makeup or clean paintbrush - can effectively remove it. Brush gently to prevent dust from getting further inside.

Apply isopropyl alcohol for complex stains

For persistent stains on hard surfaces like phone cases or smartwatch bands, isopropyl alcohol (at least 60%) is a safe option.Lightly dampen a cotton swab or microfiber cloth with the solution and gently wipe the stained areas. Avoid applying liquids directly to the device.

Let a wet gadget dry naturally

If your gadget has come into contact with water or wet paint, turn it off immediately and let it dry on its own. Place it in a ventilated place or in a bag with silica gel packets to absorb moisture. Do not use a hair dryer, as the heat may damage internal components.

Check functionality before charging

Before plugging your device in, make sure all ports and openings are completely dry and free of paint particles. Any remaining moisture may cause a short circuit or lead to corrosion.

Don't: Cleaning mistakes to avoid

Avoid using harsh chemicals

It may be tempting to use strong cleaning agents such as bleach, ammonia-based cleaners, or acetone to remove stubborn stains, but these can remove protective coatings and damage the screen or plastic casing. Use a mild solution like isopropyl alcohol or water for safe cleaning.

Don't shake or blow air into ports

Shaking your device to remove dust or blowing air into its ports can push paint particles further inside, potentially blocking essential components. Instead, use a soft brush or compressed air to gently remove debris.

Don't use paper towels or rough cloths

Paper towels and rough cloths can leave lint or even scratch the screen. Always use microfiber cloths or lint-free wipes to protect the surface of your device.

Never submerge the device in water

Even if your gadget is labeled water-resistant, submerging it in water can be risky. Water can penetrate small holes and damage the insides. Instead, use a damp cloth to clean the surface.

Avoid charging immediately after cleaning

If moisture remains in the port, charging the device immediately after cleaning can be dangerous. Even if the exterior feels dry, wait a few hours before plugging in to ensure that any remaining moisture has evaporated.

Protect your gadgets for future festivals

The best way to protect your gadgets from Holi-related damage is to take preventive measures before the festival begins. Using a waterproof pouch, protective cover, or old device can reduce the risk to a great extent. However, if your device does get stained or wet, following these careful cleaning steps will help restore its functionality without any further damage.

By handling your gadgets carefully, you can keep them in tip-top condition – ready for your next adventure. Celebrate Holi worry-free, knowing that your tech is safe and sound!



Related Posts